Manual
Removal of transport safety bars
The transport safety bars must be removed before using your machine (see Pic 1 - 3) or your
machine could be severely damaged.
•
Withdraw both bars from their sockets (Pic 1 - 2).
•
Seal the holes with the plastic plugs provided (Pic 3).
•
In the event of your machine having to be transported, i.e. moving house it is essential for
the transport bars to be put back into the machine.
•
Drain any remaining water from the machine (see emergency draining page 42).
•
In order to avoid any water leaking from your machine during transport, the machine should
always remain upright.
34