Cleaning and maintenance
Before starting cleaning, maintenance and removal of faults, pull the mains plug out of the socket
and close the water-tap!
Cleaning and prevention of limescale formation
•
The removal of limescale deposits is generally not necessary with the range of water I
(0 - 10° dH) and with the correct dosage of the detergent.
•
The best protection against limescale is prevention, which consists in the use of water
softeners.
•
Use only anti-scale cleaners intended for washing machines and follow their instructions for
use.
•
It is recommended to use anti-scale cleaners about once a quarter of the year.
Never remove limescale mechanically.
Advise
Remove the detergent drawer for cleaning at regular intervals.
•
Pull out the drawer (Pic. 1).
•
Lift the drawer slightly, and remove completely.
•
Clean detergent drawer with warm water.
•
Remove siphon cover and clean with warm water.
•
Clean the filler channel for softener if necessary with a bottle brush
and remount siphon cover. (Pic. 2).
•
When drawer removed check if there is any remaining detergent in
the shaft of the drawer and clean if necessary.
•
Clean housing, control panel and loading door with a soft cloth.
Cleaning the intake filter
•
Turn off the water and unscrew the intake hose from the machine.
•
Take the coarse filter out and clean it.
•
Replace the filter.
•
Screw the intake hose back on to the tap and check that the
connection is watertight.
41