Listo RL 170-55hob1 Bedienungsanleitung Seite 2

Tool required: Cross-head screwdriver, Flat screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and emply.
• To take the door off, il is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
• Ali parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit fiat as this may damage the coolant system.
• lt's better that 2 people handle the unit during assembly.
1. Unscrew hinge cover
2. Open the door and unscrew the top hinge.
Then take the doorfrom the cabinet and place
it on a soft pad to avoid damage.
3. Remove the cover and screws at left side and
fit them to right side.
4. Carefully lie down the rear of cabinet on a soft
pad. Remove Iwo leveling feet first. Then unscrew
the door hinge and left foot base.
Caution! If there is a screw at left front corner,
remove it before install hinge.
V.1.0
Reversing the opening direction of the door
2