Key Combinations - Bernstein T640 Pro Gebrauchsanleitung

BERNSTEIN SHOWER-WC T640 Pro
REMOTE CONTROL INSTRUCTIONS
Nozzle position adjustment:
Press the „Spray arm forward" or „Spray arm backward" button on the remote control, the nozzle moves one step
forward or backward.
Cover flipping:
Press the „Cover flipping" button to control the opening and closing of the cover.
Seat flipping:
Press the „Seat flipping" button to control the opening and closing of the seat.
Eco mode:
After pressing the „Eco mode" button, the seat temperature is automatically set to the lowest level. In Eco mode, all
light indicators are switched off. The seat sensor detects that someone is sitting, automatically stops the energy-saving
mode and automatically switches to energy-saving mode after the user has left the seat. Press the „Eco mode" button
to switch energy-saving mode on or off.
Ceramic ambient light:
When not seated, press and hold the „Stop" button on the remote control for 5 seconds to turn the ambient light on or
off.
Night light function:
Control the switching on and off of the night light according to the light intensity of the bathroom via the light sensitivity
of the toilet body. Briefly press the „Night light" button to switch off the light-sensitive function and long press the „Night
light" button to switch on the light-sensitive function. In the factory setting, the night light is switched on; it can be
switched on or off by briefly pressing the „Night light" key.
Pipeline descaling:
After filling the descaling liquid, press the „Descaling" button in the idle state to switch descaling on or off. During
descaling, the button lights up green.
Adjustment for User 1 and User 2:
Under the current use of „water temperature, water amount, spray arm position, air temperature", press and hold the
„User 1 or User 2" button for more than 2 seconds, the current use setting can be set to the preferred custom button,
and all indicators on the remote control panel will flash twice, the settings you like have been saved. Next time, press
„User 1 or User 2" directly and all indicator lights on the remote control panel will light up for one second. Press the
rear wash or lady wash button as required.

KEY COMBINATIONS

:
● Stop + Oscillation:
Press for 5secs at the same time to turn on/off "Wireless induction to open the lid" function, when you hear a "BEEP"
sound, means you turn it on/off successfully.
● Stop + Massage:
Press for 5 secs at the same time to turn on/off "Foot sensor to open the lid" function, when you hear a "BEEP" sound,
means you turn it on/off successfully.
30