Bernstein T640 Pro Gebrauchsanleitung Seite 19

SHOWER-WC T640 Pro
PERFORMANCE SPECIFICATION
Cleaning device
* Rated power:
The average power when washers are operating for a cleaning cycle under
the condition of an ambient temperature of 20 °C ± 5 °C, a static inlet water pressure
of 0.18 MPa ± 0.02 MPa, an inlet water temperature of 15 °C ± 1 °C and the water flow,
seat temperature and water temperature are set to the highest value.
* Maximum power:
The maximum output when washers are operating for a cleaning cycle under
the condition of an ambient temperature of 23 °C ± 2 °C, a static inlet water pressure
of 0.18 MPa ± 0.02 MPa, a supply water temperature of 5 °C ± 1 °C, and the
water flow, seat temperature and water temperature is set to the highest value.
Rated voltage
Power cable length
Outlet water
temperature range
Nominal water consumption
Seat surface temperature
Smooth closing methode
of the cover and the seat
* Rated power
* Maximal power
Indoor temperature
Water temperature
Water pressure
Protection class
Product dimensions
Batteries for remote control
220-240V ~ 50-60Hz
About 1500mm
About 35ºС - 42ºС,
turn off the water temperature
4.0L / 6.0L
Room temperature - ca. 38ºС
Gear box
Remote control
Automatic sensors
Foot sensor system
1180W
1630W
3°C - 40°C
3°C - 35°C
0,1 MPa - 0,75 MPa (static pressure)
IPX4
B 425 x T 595 x H 430mm
AAA (2 x)
19