Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Before using for the first time
 A display test is carried out for
10 seconds after the appliance has
been installed and after a power cut.
The fan comes on at the same time. The
appliance cannot be used during this
time.
 Please stick the extra data plate
for the appliance supplied with this
documentation in the space provided
in the "After sales service, data plate"
section of this booklet.
Cleaning and heating up for the
first time
 Remove any protective foil and
sticky labels.
 Remove the anti-slip mat and,
if applicable, the rack from the drawer,
and sponge both with warm water and
a little washing-up liquid. Dry using
a soft cloth.
 Wipe the appliance inside and
out with a damp cloth only, and then dry
with a soft cloth.
 Replace the anti-slip mat and the
rack (if applicable) in the drawer.
1. Control panel
2. Anti-slip mat :For keeping crokery secure(Optional
accessories)
For appliances with no handle: Press the middle of the drawer to open or close
it. When opening, the drawer pops out slightly. You can then pull it out towards you.
TECHNICAL PASSPORT
Then heat the empty drawer for at
least two hours.
 Switch the appliance on by
touching the sensor
 Touch the
until the LED light.
 Touch the
until the LED on the far right lights up.
 Touch the
until 2h lights up.
 Close the drawer.
The warming drawer is fitted with
a softclose self-closing mechanism.
It also has a contact switch, which
ensures that the heating element and
fan in the appliance only work when the
drawer is closed.
Metal components have a protective
coating which may give off a slight
smell when heated up for the first time.
The smell and any vapours will
dissipate after a short time, and do
not indicate a faulty connection or
appliance. Ensure that the kitchen is
well ventilated whilst the appliance is
being heated up for the first time.
Warmer drawer
.
sensor repeatedly
sensor repeatedly
sensor repeatedly
33
Werbung
