Backlight - Santec VTC-8112P Bedienungsanleitung

Bedienungsanleitung / User manual
VTC-8100P / VTC-8112P / VTC-8200P / VTC-8212P / VTC-8300WDP / VTC-8312WDP

Backlight:


BLC:
Backlight compensation. If the lens is exposed to strong backlight, you can activate
the „backlight" function in order to achieve a clear picture of both the object itself and
the background. Adjustments can be made for different areas (top, bottom, left, right)
and for different levels (medium, high, low).

HLC (only for cameras VTC-8100P, VTC-8112P, VTC-8200P and VTC-8212P):
Highlight Compensation. Highlights in the picture can be deleted which makes the
picture sharper. The level can be set from 0-150.

WDR (only for cameras VTC-8300WDP and VTC-8312WDP):
When in WDR mode, you will get into the sub-menu by pressing the joystick (SET).
You can adjust the "WDR-limit" by choosing "low", "medium" or "high". Moreover, you
can adjust the value from 0-100.
DNR (Digital Noise Reduction):
Noise can be reduced. If the DNR value is increased and thus the noise is reduced, artefacts
may occur. The level can be set from 1-32.
If AGC is switched off, the DNR function is off, too.
Day/Night:

Colour: colour mode

BW: black/white mode

Auto: automatic switching to colour or black/white mode

External: The switching is done by an external sensor which is connected tot he
camera (interface at the camera backside „Day/Night IN").
Image Adj:

Freeze

V-Rev: vertically reversed display of the picture

H-Rev: horizontally reversed display of the picture

D-Zoom (ON, OFF): 1x to 10x digital zoom. If the zoom is active, max. zoom is up to
10x.

Sharpness (ON, OFF): By increasing the sharpness, the edges of the object become
clearer. However, if the sharpness is set too high, noise may occur and the picture
may be blurred (level 1-31).

Return: Save your settings and return to set-up menu.
_________________________________________________________________________________
- 49 -