Herunterladen Diese Seite drucken

haacon L/K3 Betriebsanleitung Seite 9

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
5. TEchNIcAL DATA
Type
Order number
Maximum load static / set
t
Maximum load dynamic / set
t
1 set = 2 supports
Lift
mm
Drop lift
mm
Heigth
mm
Spindle thead
Crank force
N
Gear ratio
Lift/crank turn
mm
Working temperature
° C
Weight
kg
Modifications of the design and execution reserved.
Special design! pay attention to the serial number plate and the
drawing.
6. INSTALLATION
Read the operating manual before installing and commis-
sioning the support device.
Observe the accident prevention regulations issued by the pro-fes-
sional association relating to vehicle maintenance and the Machine
Safety Law. The spindle support device is a major safety component for
uncoupled semi-trailers.
It is subject to high loads during the coupling and uncoupling pro-
cesses. Great care and attention should therefore be given to its instal-
lation. It may only be installed and commissioned by specially trained
personnel. The connection and bracing for the spindle support device
must be of an adequate size and secur-ed without tension.
We recommend that stops be fitted to relieve the strain on the securing
screws above the screw-on plate.
L/K3
210798
213609
230068
6
3
350
300
180
705
722
Tr 30x4
260
1,83
2,18
-20 ... +50
ca. 38
z Retract both supports to the stop. This ensures that both supports
will be extended in parallel.
z Align the supports vertically and parallel with one another.
z Depending on the installation size, cut the connection shaft to
length, mount clamping sleeve 6x35.
z Install the connection shaft. Ensure that you do not make the con-
nection parts stiff by bending any components
z Connect the shaft to the drive side with clamping sleeve 5x24
After installation conduct a function test. If all the components have
been installed correctly the spindle will turn easily.
Always install and use the holder for the crank handle. It
is for your own safety!
If the components are not installed correctly the manufacturer and the
support of the spindle support device will not accept any claims under
the warranty.
– 9 –
GB

Werbung

loading

Verwandte Produkte für haacon L/K3