Service Centre; Maintenance And Cleaning - Matrix BS 600 Originalbetriebsanleitung

Using the device in a fixed mounting
· Turn the electrical power tool upside down as
shown in Figures D, F and place it on a stable
working surface.
· Insert the two clamps 11 into the recesses 2
provided for this purpose and clamp the
electrical power tool securely down on to the
surface.
Tips and tricks
· Never use the same sanding belt to sand wood
and metal.
· Worn or ripped sanding belts can damage
the workpiece. Change sanding belts at the
appropriate time.
· Keep the sanding belt properly tensioned so
that it does not hang down too much and
become unusable due to nicks, creases etc.

Maintenance and cleaning

Before you carry out any work
on the belt sander always pull the mains plug out
of the mains socket.
The belt sander is designed to be maintenance-
free.
· Clean the device frequently. This should be done
immediately after you have finished using it.
· Use a dry cloth to clean the device - never use
petrol, solvents or cleaners that attack plastic.
Emptying / cleaning the dust box:
· Simultaneously press the two release button(s)
6 and pull the dust box 5 backwards from of
the device.
· Empty the dust collection box completely by
knocking the dust out and place the dust box
back on to the device.
18
· Always keep the ventilation slots clear.
· Remove any adhering dust with a narrow
paint brush.

Service centre

· WARNING! Have your device repaired
only by qualified specialist personnel using
original manufacturer parts only. This will
ensure that your device remains safe to use.
· WARNING! If the plug or mains lead needs
to be replaced, always have the replacement
carried out by the manufacturer or its service
centre. This will ensure that your device remains
safe to use.
Disposal
Do not dispose of electrical power
tools with the household rubbish!
In accordance with European Directive 2002 /
96 / EC (covering waste electrical and electronic
equipment) and its transposition into national
legislation, worn out electrical power tools
must be collected separately and taken for
environmentally compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.