Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. WEATHER FORECAST FUNCTION
6.1 OPERATION
• After powering on, or holding the WEATHER button for 3 seconds, the weather
icon flash on the LCD. Enter the current weather by pressing ▼ or ▲ button.
Press WEATHER button to confirm the setting. The weather forecast may not be
accurate if the current weather entered is not correct.
• The weather station will start the first forecast at around 6 hours later after the
current weather status is entered.
• The current weather status should be entered again if the altitude of the Main
Unit is changed. (Barometric pressure is lower at higher altitude location.
Therefore, altitude change will affect the weather forecast).
6.2 WEATHER CONDITIONS
There are totally 5 different weather status animations in the weather forecast:
Sunny, Slightly Cloudy, Cloudy, Rainy, Freezing or Snow.
• Freezing or snow is shown if the weather forecast is Rainy and outdoor
temperature (any channel) under 0 °C.
• Frost Alert
is shown if the outdoor temperature (any channel) is between
−2 °C ~ +3 °C.
Note: If there is any inconsistency of weather forecast between Local Weather Station and this
unit, the Local Weather Station's forecast should prevail. The manufacture will not hold
responsible for any trouble that may come up due to wrong forecasting from this unit.
7. THERMOMETER
7.1 RF TRANSMISSION PROCEDURE
• The main unit automatically starts receiving transmission from outdoor sensor for
outdoor temperature & humidity after weather condition setting.
• The outdoor sensor will automatically transmit temperature and humidity signal
to the main unit after batteries inserted.
• If main unit failed to receive transmission from outdoor thermo sensor in first 3
minutes after the batteries inserted ("- - . –" display on the LCD), hold
RF SEARCH button for 3 seconds to receive transmission manually. The RF
icon
displays on the LCD.
EN - 28
Werbung
