Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. OUTDOOR SENSOR
C1: Transmission Indication LED
C2: Temperature display
C3: Humidity display
C4: Wall mount hole
4.GETTING STARTED
4.1 MAIN UNIT
• Remove battery compartment door and insert 2 x AA size battery.
• Or connect the power cord to the wall outlet. Before connecting the unit
to power, please make sure your local voltage is the same as marked on
the adaptor.
Note: When powered by battery only, backlight would be off. Press snooze button, backlight will
last for around 5 seconds. When connecting with the adaptor on the premise that batteries have
been installed correctly, this product will switch to the external power supply automatically.
4.2 OUTDOOR THERMO SENSOR
• Batteries compartment of thermo sensor is locating behind the back cover,
• Insert 2 x AA batteries observing polarity ["+" and "−" marks]
5. INSTALLATION
5.1 MAIN UNIT
The main unit can be placed onto any flat surface, or wall mounted by the hanging
hole at the back of the unit.
5.2 OUTDOOR THERMO SENSOR
The remote sensor should be placed onto flat surface or securely mounted onto a
horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 70 m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc
C5: "RESET" button
C6: Battery compartment
C7: Cable probe
EN - 27
Werbung
