Simons Voss Technologies PegaSys Teach-in Serie Kurzanleitung Seite 21

21 / 48 | EN 3. System setting codes
Programming:
{Prog. code}-{*}-{7}-{*}-{new programming code}-{*}-
{new prog. code for the second time}
Setting the opening time
The opening time for the codes in question can be 1 – 9
seconds.
Programming:
{Prog. code}-{*}-{99}-{*}-{value 1 – 9}-{*}
Delete programmed code
Codes that have already been programmed can be deleted.
Programming:
{Prog. code}-{*}-{5}-{*}-{the code to be deleted}-{*}-
{further code or * to exit}
Restoring defaults
The entire code memory is deleted and all pre-set codes
(see code types, their function and programming) are active
again.
Disassembly is necessary to restore storage mode. There is
a reset button on the rear. Press it for approx. 15 seconds
until the LED stops flashing and an audible signal is emitted.