Simons Voss Technologies PegaSys Teach-in Serie Kurzanleitung Seite 19

19 / 48 | EN 2. Code types, their function and programming
{Prog. code}-{*}-{33}-{*}-{191}-{*}-{requested code}-{*}-
{additional code or * to exit}
Locking code
Entering this code locks the lock.
Programming:
{Prog. code}-{*}-{33}-{*}-{195}-{*}-{requested code}-
{*}-{additional code or * to exit}
Blocking code
All codes except the master code are rejected after this
code is entered.
All other codes are not permitted again until the blocking
code has been re-entered.
Programming:
{Prog. code}-{*}-{33}-{*}-{115}-{*}-{requested code}-{*}-
{additional code or * to exit}
One-time code
Opens the lock for a pre-set time (adjustable: 1 – 9
seconds).
This code can only be used once and is then erased from
the memory.
Programming:
{Prog. code}-{*}-{33}-{*}-{113}-{*}- {requested code}-
{*}-{additional code or * to exit}