Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Do not use the device with attachments or accessories that are not recommended by
beurer GmbH.
• During use, do not expose the device to temperatures below 10 °C or above 35 °C.
• Do not use the device if you see or smell smoke during use.
• Do not use the device if the fan opening on the device is cracked, is becoming detached
or is missing entirely.
• Do not use the device if the skin colour sensor on the device or the light area is cracked
or broken.
• Do not direct the light pulse at any other surfaces other than the skin. Otherwise, this may
result in serious damage to the light emission window or the skin colour sensor. Damage
may also be caused to the flashed surface. Only activate the light pulse once the device
is in contact with the skin.
• After use, store the device in its original box.
• Do not expose the device to several hours of direct sunlight or UV light in order to pre-
vent damage.
5. Device description
1. Light area
2. Skin colour sensor/skin contact sensor
3. Intensity display (3 levels)
4. ON/OFF/power selection button
Safety features
The device has a skin colour sensor. This skin colour sensor prevents you from treating
your skin if it is too dark or too tanned.
The device also has a built-in UV filter that blocks harmful UV rays.
The device has a built-in skin contact sensor to protect the eyes. The sensor was devel-
oped so that no light pulses can be emitted when the device is held in the air. A light pulse
is only emitted when the skin contact sensor is in full contact with the skin.
3 4
6
5
1
2
5. Indicator lamp
6. Trigger button
7. Socket for device plug
33
7
Werbung
