3. Select the cooking zone you want to control via the timer
(e.g., cooking zone 1) using the sensors for the
OF THE COOKING ZONES
4. Touch timer control, the '10'will show in the timer display,
and the '0' flashes.
5.Set the time by touching the 'slider' control.
6. Touch timer control again, the '1' will flash.
7. Set the time by touching the 'slider' control.
8. When the time is set, it will begin to count down
immediately. The display will show the remaining time.
NOTE: there will be a red dot in the right bottom corner of
power level indication which indicating that zone is selected.
9. When cooking timer expires, the corresponding cooking
zone will be switch off automatically.
NOTE: other cooking zones will keep operating if they are
turned on previously.
If you want to change the set countdown time (cooking time) after programming, you
must start at step 1 again
.
~
~
91
SELECTION