Camera Reset; Lens Adjustment - Instar In-8415 2K+ Bedienungsanleitung

8. Camera Reset

In order to reset your camera, please press the
small reset button at the back of your camera
for 20 seconds. You will hear the confirmation
sound after you release the button. After the
reset, the camera will restart, which can take
up to 60 seconds, and all data in the camera
will be set back to factory defaults. Therefore,
please use a network cable or WPS to recon-
nect the camera to your network. For more in-
formation on how to install your camera again,
please visit: https://install.instar.com. Once
you connect the camera to the network, use
the INSTAR Camera Tool to find out the cam-
era's IP address and open the camera's WebUI
to start configurating your camera again.

9. Lens Adjustment

The IN-8415 2K+ standard lens has a depth of field (also focus range) that is
adjusted to a distance of approx. 5 - 10m. In case your area of interest is out of
focus, you will have to adjust the lens accordingly.
Lens Tool
Fig.1 & 2:
Open the WebUI and check the live video. Turn the lens, using the lens focal tool
(part of the delivery content) until your area of interest is in focus. If you turn the
lens clock-wise, the plane of focus moves away from the camera's image sensor,
and if you turn it counter-clock-wise, the plane of focus moves towards it.
Go to https://install.instar.com
Fig. 1
Press 20s
to reset camera
Fig. 2
10-EN