EuroLite LED PFE-20 WW Bedienungsanleitung Seite 17

OPERATION
After you connected the device to the mains, the device starts running.
Gobo holder
To insert the gobo holder, remove the screws from the cover. Insert the gobo
holder in the designated slot in the housing. Then attach the cover again,
by tightening the screws.
To insert or replace a gobo, pull the
gobo holder from the housing and loosen
the screw of the gobo holder. Insert the
desired gobo into the holder and tighten
the screw. Insert the gobo holder into the
slot in the housing.
Focus
To adjust the focus, please loosen the knurled head screw of the lens tube.
To focus, push the lens tube back
and forth. When in the desired
position, tighten the knurled
head screw firmly.
Gobo holder
screws
screw
17/20 00134222, Version 1.1