Cameo Light ZENIT P 40 Bedienungsanleitung Seite 17

Mode
DMX
Slave
Auto
STATIC MODE (Static)
In the same way as with a DMX control unit, the static mode allows you to adjust all functions such as Dimmer, stroboscope (Strobe), R, G, B, W and
the colour temperature (Colour Temp) directly on the device applying values from 000 to 255. Thus, an individual scene can be created without an
additional DMX controller. As previously described in SETTING THE OPERATING MODE, select the Static operating mode and confirm by pressing
ENTER. Using UP and DOWN, select one of the menu items (observe the arrow) and confirm with ENTER. A three-digit numeric field now appears on
the display and you can use UP and DOWN to select the desired value from 000 to 255. Confirm with ENTER. Press MODE three times to return to the
main display (Static Mode).
Mode
Slave
Auto
Static
COLOUR MACROS (Colour Macro)
15 different colour macros are available as presets. As previously described in SETTING THE OPERATING MODE, select the "Colour Macro" menu item
and confirm by pressing ENTER. Using UP and DOWN, select the desired colour as a preset (observe the arrow) and confirm with ENTER (Colour Off =
Blackout). Press MODE twice to return to the main display (Colour Macro Mode).
Mode
Auto
Static
Colour Macro
DEVICE SETTINGS (Settings)
Pressing MODE will take you to the selection menu for system settings (--- Menu ---). Using UP and DOWN, select the menu item "Settings" (observe
the arrow) and confirm with ENTER.
Menu
DMX Address
Mode
Settings
You will then be taken to the sub-menu to set the following sub-menu items:
Auto
001
Program 1 <100>
Program 2 <100>
Program 3 <100>
100
Program 4 <100>
Program 5 <100>
Program 6 <100>
Auto
000
Dimmer <255>
Strobe <255>
Red <255>
255
Green <255>
Blue <255>
White <255>
Colour Temp <255>
Blue
Colour Macro
Lavender
Colour Off
Mauve
Red
Magenta
Amber
Pink
Yellow Warm
Warm White
Yellow
White
Green
Cold White
Turquoise
Cyan
Mode
Auto
Mode
Static
Mode
Colour Macro
17