Kemar KRC-140 Bedienungsanleitung Seite 11

TROUBLESHOOTING
Symptom Possible Cause
Rice does not cook. Is the COOKING button pressed while the unit is in KEEP WARM mode?
Is power supply cord plugged in properly or has any power failure occurred?
Rice is hard or Is the water quantity correct?
undercooked.
Are there any foreign objects sticking to the outer Inner Pot, sensor or heating
element?
Is the rice stirred thoroughly after cooking?
Is the correct menu selected?
Is power supply cord plugged in properly or has any power failure occured?
Is the Inner Lid attached properly?
Are there any foreign objects between the Inner Pot and Inner Lid, or between the
Inner Pot and Outer Lid seal?
Rice is soft or sticky. Is the water quantity correct?
Are there any foreign objects sticking to the outer Inne Pot, sensor, or heating
elements?
Is the rice stirred thoroughly after cooking?
Is the correct menu selected?
Rice is scorched. It the water quantity correct?
Are there any foreign objects sticking to the outer Inner Pot, sensor or heating
element?
Is the correct menu selected?
Is rice washed thoroughly before cooking?
Rice cooking takes too Is the water quantity correct?
long. Are there any foreign objects sticking to the outer Inner Pot, sensor, or heating
element?
Is the correct menu selected?
Is power supply cord plugged in properly or has any power failure occurred?
While using the KEEP Are there any foreign objects sticking to the outer Inner Pot, sensor or heating
WARM function, the element?
rice becomes hard,
Is the rice stirred thoroughly after cooking?
discolored or develops
Is rice washed thoroughly before cooking?
an odor.
Is power supply cord plugged in properly or has any power failure occurred?
Was the rice kept warm over 12 hours?
Is the Inner Lid attached properly?
Is the cold rice kept warm or cold rice added?
Are there any foreign objects sticking to the outer Inner Pot, sensor, or heating
element?
The display on the Can you still not read the display even after plugging the appliance into an electrical
DISPLAY PANEL is outlet? If so, we recommend that you replace the lithium battery.
weak and cannot be
read.
Water boils over during Is the water quantity correct?
cooking.
Are there any foreign objects sticking to the outer Inner Pot, sensor or heating
element?
Is the correct menu selected?
Is rice washed thoroughly before cooking?
Is the Inner Lid attached properly?
Are there any foreign objects sticking to the outer Inner Pot, sensor, or heating
element?
Steam comes out from Is the water quantity correct?
around the outer Lid.
Is the correct menu selected?
Is the Inner Lid attached properly?
Are there any foreign objects sticking to the outer Inner Pot, sensor, or heating
element?
Rice cooking does not Is the water quantity correct?
complete at the preset
Are there any foreign objects sticking to the outer Inner Pot, sensor or heating
time.
element?
Is the correct menu selected?
Is power supply cord plugged in properly or has any power failure occurred?
Is the timer set properly?
The control buttons Is power supply cord plugged in properly or has any power failure occurred?
won't work.
There is noise during The clicking sound is caused by the unit adjusting power usage. I tis not a malfunction
cooking.
Water droplets remaining on the outside of the Inner Pot or the inner wall of the main
body may cause noise during cooking. It is not a malfunction.
Check the following before requesting service.
Reference
Page
4, 5, 6
3
4
1, 4, 9
5
4, 6
3
4
4
1, 4, 9
5
4, 6
4
1, 4, 9
5
4
4
4
1, 4, 9
4, 6
3
5
4, 6
4
3
5
4
5
4
3
4
1, 4, 9
4, 6
4
4
4
4
4, 6
4
4
4
1, 4, 9
4, 6
3
6
3
4
4
11