Display Messages - MBM FRBE74AD Installations- Und Bedienungsanleitung

FAULT
The fryer does not heats
The fryer don't cooks cor-
rectly
Display problems (on appli-
cable models)
Error message / e.g
EFr / ESa (on applicable
models)
Oil drainage problems
(top versions)
If the problem cannot be resolved, turn the appliance off and shut all the
supply valves. Then contact authorized customer service.
LIST OF MESSAGES
splayed during operation.

DISPLAY MESSAGES

MAn
MEL
SHA
end
P00 - P99
YES
no
E...
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
No power supply
•
Safety thermostat
•
Heating element broken
•
Contactor switch broken
•
Working thermostat
•
broken
Heating element not
•
positioned correctly
Heating element mi-
•
croswitch broken
Incorrect circuit board
•
configuration (on appli-
cable models)
Heating element broken
•
Contactor switch broken
•
Connection cable dama-
•
ged /
Functions Knob
•
working
. - Probe fault
- Tank over-temperature
Extension pipe not inser-
ted correctly
/ On applicable models, the following messages are di-
Manual cooking mode
Slow heating
Shake basket
Timer ended
Program saved / from 00 to 99
yes
no
Error messages
- 21 -
MAINTENANCE
INTERVENTION
Check power supply inlet
•
Contact authorized tech-
•
nical assistance
- Contact authorized techni-
cal assistance
Contact an authorised cu-
•
stomer support service
not
- Turn the Selection knob to
"Zero" (see ILL sect. - REF
g) Fig.3) to restart and wait
for the tank to cool down (T
<120°C)
Push the pipe in as far as
it will go
DESCRIPTION
8.
EN