Bosch GST Professional 140 BCE Originalbetriebsanleitung Seite 13

OBJ_BUCH-1320-004.book Page 13 Monday, November 26, 2012 9:56 AM
Action
Connecting the dust extraction
Adjusting the Cutting Angle
Mounting the metal overshoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching the Power Tool On/Off
Guide the power tool toward the
workpiece only when switched on
Switching the worklight On/Off
Lubrication when cutting metal
Plunge Cutting
Selecting Accessories
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools
Figure Please observe
5
6
7
8
9
10
11
12
13
14
15
–
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 17, page 188).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
English | 13
Page
180 –181
181 –182
183
183
184
184 –185
185 –186
186
186 –187
187
187 –188
190 –191
2 609 932 855 | (26.11.12)