Intenso WPD10000 Bedienungsanleitung Seite 14

Any other use or use beyond what is speci昀椀ed is deemed as not intended use and can lead to
damages and injuries. This product is not intended for commercial use or for medical and spe-
cial applica琀椀ons, where the failure of the product can cause injuries, mortali琀椀es or considerable
material damages. Claims of any type for damages resul琀椀ng from use other than for the intended
purpose or non-observance of the safety instruc琀椀ons are excluded.
USE
Device overview
1 - Function key (ON/OFF)
(Quick Charge)
2 - USB-A 1 OUT
3 - USB-C OUT
(PD/Quick Charge)
(Quick Charge)
4 - USB-A 2 Out
5 - Status LEDs
6 - Wireless Charging Area
Operating
1. Func琀椀on key (ON/OFF)
By brie昀氀y pressing, the current ba琀琀ery status is displayed through the LED lights and the wireless
charging func琀椀on of the Powerbank is ac琀椀vated.
If there is no device connected to the Powerbank, or the connected device signals to the power
bank that it is en琀椀rely charged, the power bank will automa琀椀cally switch to the standby mode a昀琀er
a 琀椀me interval of approximately 40 seconds.
2. LED status display
The individual LEDs display the remaining energy of the Powerbank:
% - energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied cable USB-C to the port USB-C (USB-C Out/In) of the Powerbank;
then connect the other end of the USB cable to a power supply USB-C or to a port USB-C on your
computer. The charging process and current charging status will be indicated by the LED status
lights. If the Powerbank is en琀椀rely charged, the LED status lights remain illuminated. The required
charging 琀椀me of the Powerbank depends on the selected charging source and the output power.
5
/ IN
(PD)
1 2
LED 1 LED 2
EN - Page 3 of 8
3 4
LED light
LED 3
6
LED 4