Philips HQ9190CC/20 Bedienungsanleitung Seite 19

The shaving heads may be damaged or
,
worn. Replace the shaving heads (see chapter
'Replacement').
2 Why doesn't the shaver work when the on/off
button is pressed?
The battery may be empty. Recharge the battery
,
(see chapter 'Charging').
The shaver may not be connected to the mains.
,
Put the powerplug in the wall socket.
3 Why does the shaving unit come off the
shaver?
The shaving unit may not be placed correctly.
,
Put the shaving unit back onto the shaver by
inserting the hinge into the slot in the rim of the
hair chamber and pushing it home until it locks
into place ('click').
4 Why does the display show the word CHECK
and a blinking shaving unit symbol and tap unit
symbol?
Long hairs and dirt may be obstructing the
,
shaving heads. Clean the shaver thoroughly
before you continue shaving (see chapter
'Cleaning and maintenance').
The shaving heads may be damaged or worn.
,
Replace the shaving heads (see chapter
'Replacement').
5 Why isn't the shaver entirely clean after it has
been cleaned in the washing machine?
The cleaning fluid in the cleaning chamber may
,
be soiled. Empty and rinse the cleaning chamber.
The cleaning fluid level may be too low. If the
,
fluid volume in the cleaning chamber drops
below the minimum level during the cleaning
program, the program is aborted.The cleaning
EnglisH
21