Nikon E2N Bedienungsanleitung Seite 9

3
Release the shutter.
Image data is output from the V-Out (video
output) terminal.
- Continuous shooting operation cannot be
performed even when the shutter release
button is held down.
- If no Image Memory Card is inserted, the
shutter can be released but no image data
is output.
- If the Image Memory Card cannot store data
(because of insufficient memory, write-
protection, etc.), the shutter cannot be
released.
4 Release the shutter again to renew
the video output.
- Whenever the shutter is released, video
output is renewed.
- In preview mode, video output operation
stops automatically after approx. 3 minutes
when the camera is not in use. The power
will turn OFF after
a
further 16 seconds
when the camera is not in use. Press the
shutter release button halfway or set the
Main dial to any position other than
C
to
stop video output operation.
-You cannot use the command dial and
aperture dila to change modes and values
during video output. Cancel preview mode
to change shooting conditions once .
• NOTE
Th e following accessories for the E2/E2s camera can also be
used with the E2N.
• Rechargeable Battery Pack EN-1
• Quick Charg er EH-1 (EH-2)
• DC Ad apter ES-1
• Image Memory Card EC-15
• Video Cabl e EG-10
• Extern al Sync Ad apter EX- 1 0
9