Nikon E2N Bedienungsanleitung Seite 8

Using preview mode
In thi s mode, the video signal from camera to monitor is renewed
each time you press the shutter re lease button . You can prepare
shooting while checking compositions and exposures before
shooting .
-No image data can be downloaded to the Image Memory Card. When you want to
download image data to the Image Memory Card. cancel the preview mode or set
the frame advance mode to S (single-frame shooting). (See page 34 of the E2/E2s
manual.)
1
Set the frame advance mode to C.
While pressing the Main dial lock-release
button . rotate the Main dial to C.
2
To set Preview mode, rotate the
command dial wh ile simultaneously
pressing the MODE and Metering
8
system buttons.
-Rotate the command dial to toggle between
the
C
(continuous shooting) mode and the
preview mode.
- Check if the frames-shot counter in the LCD
panel and the frame counter in the
viewfinder are blinking.
c c - preView ~