Product Features; Inserting/Replacing The Batteries - Bosch GPL 5 C Professional Originalbetriebsanleitung

OBJ_BUCH-847-002.book Page 14 Friday, May 16, 2014 7:10 AM
14 | English
Point Laser
Angular accuracy (90°)
– Point beams
– Plumb crosses
Self-levelling range, typically
Levelling duration, typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Tripod mount
Batteries
Operating duration in operating mode
– Plumb crosses and laser points
– Laser points
– Plumb crosses and front point
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
The measuring tool can be clearly identified with the serial number 11 on the type plate.

Product Features

The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Operating mode button
3 Battery low indicator
4 On/Off switch
5 Magnets
6 Tripod mount 5/8"
7 Tripod mount 1/4"
8 Latch of battery lid
9 Battery lid
10 Laser warning label
11 Serial number
12 Protective pouch
13 Universal holder*
14 Laser target plate
15 Laser viewing glasses*
16 Measuring plate with stand*
17 Tripod*
* The accessories illustrated or described are not included as
standard delivery.
1 609 92A 0KY | (16.5.14)
IP 54 (dust and splash water protected)
Assembly

Inserting/Replacing the Batteries

Alkali-manganese batteries are recommended for the meas-
uring tool.
To open the battery lid 9, slide the latch 8 in the direction of
the arrow and fold the battery lid up. Insert the batteries.
When inserting, pay attention to the correct polarity accord-
ing to the representation on the inside of the battery lid.
When the batteries become weak, a single 5 s audio signal will
sound. The battery low indicator 3 continuously flashes red.
The measuring tool can be operated for less then 2 h.
If the batteries are weak when switching on the measuring
tool, the 5 s audio signal will sound directly after switching on
the measuring tool.
Always replace all batteries at the same time. Only use batter-
ies from one brand and with the identical capacity.
 Remove the batteries from the measuring tool when
not using it for extended periods. When storing for ex-
tended periods, the batteries can corrode and self-dis-
charge.
GPL 5 C Professional
±0.4 mm/m
±0.4 mm/m
±4°
<4 s
–10 °C ... +40 °C
–20 °C ... +70 °C
90 %
2
635 nm, <1 mW
1
1/4", 5/8"
4 x 1.5 V LR6 (AA)
9 h
20 h
12 h
0.6 kg
146 x 57 x 119 mm
Bosch Power Tools