Product Description And Specifications - Bosch GTL 3 Professional Originalbetriebsanleitung

OBJ_BUCH-828-004.book Page 16 Friday, May 16, 2014 1:02 PM
16 | English
Product Description and
Specifications
Please unfold the fold-out page with the representation of
the measuring tool and leave it unfolded while reading the
operating instructions.
Intended Use
The measuring tool is intended for determining and
checking right angles as well as for aligning tiles in angles
of 45° and 90°.
Product Features
The numbering of the product features shown refers to
the illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Laser warning label
3 On/Off button
Technical Data
Tile laser
Article number
Working range (with laser target plate or with ceiling plate)
Angular accuracy
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Batteries
Operating life time
– with 2 laser lines
– with 3 laser lines
Automatic switch-off after approx.
Weight according to EPTA-Procedure 01/2003
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
2) The angular accuracy between the 45° laser line and the 90° laser line is max. ±0.4 mm/m.
The measuring tool can be clearly identified with the serial number 5 on the type plate.
1 609 92A 0L0 | (16.5.14)
4 Magnets
5 Serial number
6 Battery lid
7 Latch of battery lid
8 Battery indicator
9 Laser target plate
10 Levelling plate
11 Cut-out in the levelling plate
12 Protective pouch
13 Laser viewing glasses*
14 Ceiling measurement plate*
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of acces-
sories can be found in our accessories program.
GTL 3
Professional
3 601 K15 200
1)
20 m
2)
±0.2 mm/m
– 10 °C ... +50 °C
– 20 °C ... +70 °C
90 %
2
635 nm, <1 mW
1
4 x 1.5 V LR6 (AA)
18 h
12 h
30 min
0.5 kg
Bosch Power Tools