tbs electronics Omnicharge Solar OCS 150-60 Bedienungsanleitung Seite 11

3. OMNICHARGE SOLAR SETUP
All information on how to commission the Omnicharge Solar charger, how to interpret the LED
indicators on the device and how to select the battery type using the setup button on the device
itself, is explained in chapter 3 of the installation manual. This manual is included with the charger or
can be downloaded from our website at tbs-electronics.nl/downloads. For a more advanced setup
and insight in real time parameter data, you can either use the front panel information display or the
TBS Dashboard Mobile app. For setting up the solar charger, we strongly advice to use the app for a
clearer overview and more options.
3.1 Using the Dashboard Mobile app
The easiest way to setup your Omnicharge Solar charger is to use the TBS Electronics Dashboard
Mobile app. You can find this app in the Apple App Store and Google Play. Besides setting up the
charger, this app will also provide you with real time information about the chargers' operation and
access to historic data like solar energy yield and maximum power per day. The global operation of
the Dashboard Mobile app is explained below using the iOS version. The Android version will
however be very similar with only some differences in the system messages when making a
Bluetooth connection. For Android, do make sure that you also allow Location Permission and select
'Precise' and 'While using the app' after that. (TBS Dashboard does not locally or externally store any
personal, usage or location data)
Once the app is installed and launched you
will see the screen as shown on the right.
Please press 'Allow' to confirm acceptance
of this notifications request.
After that, please press the 'Add Device'
button at the bottom of the screen.
11