Technical Specifications - EuroLite Mirrorball-Set Bedienungsanleitung

2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

LED Pinspot:
Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Number of 3W LEDs:
LED beam angle:
Color temperature:
Dimensions (LxWxH):
Weight:
Mirrorball motor:
Power supply:
Power consumption:
Maximum charge:
Max. diameter of mirror ball:
Rotation-speed:
Diameter of base plate:
Height:
Weight:
Mirrorball:
Diameter:
Weight:
Please note: Every information is subject to change without prior notice. 23.03.2010 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
:
B
230 V AC, 50 Hz ~
13 W
45° C
60° C
0.5 m
0.1 m
1
6°
6000K
100 x 90 x 100 mm
0.3 kg
230 V AC, 50 Hz ~
4 W
3 kg
20 cm
approx. 1.5 RPM
112 mm
60 mm
0.45 kg
20 cm
0.7 kg
19/19 00051506.DOC, Version 1.0