1. Install the cap-screws over the main unit
1. Install the cap-screws over the main unit
The cap-screws are built from a screw, a cap and a nut and they are supplied assembled when purchasing an external module, like in
The cap-screws are built from a screw, a cap and a nut and they are supplied assembled when purchasing an external module, like in
the following picture:
the following picture:
1. Setzen Sie die beim Modul beigepackten Hutschrauben gemäß der Abbildung zusammen.
Screw the cap-screws un
Screw the cap-screws un l the nut touches the unit:
Schrauben Sie diese nun die Gewinde der Haupteinheit:
2. Nachdem die Hutschrauben auf die SLIM-Einheit geschraubt wurden, überprüfen Sie noch einmal, ob sich die
2. Once the cap-screws have been screwed on the SLIM unit, double check that the "closing systems" of the external module are in
„Schließsysteme" des externen Moduls in der offenen Position befinden:
open
2. Once the cap-screws have been screwed on the SLIM unit, double check that the "closing systems" of the external module are in
open posi on:
Schraube
Hülse
Screw
Mutter
Cap
1. Install the cap-screws over the main unit
Nut
The cap-screws are built from a screw, a cap and a nut and they are supplied assembled wh
the following picture:
Screw the cap-screws un
Top closing system
2. Once the cap-screws have been screwed on the SLIM unit, double check that the "closin
open
Bottom closing system
Mutter
Oberes Verschlusssystem
Unteres Verschlusssystem
Schraube
Hülse
DE
Obere
Untere
57