Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DO NOT touch the power cable before it
has been disconnected from the mains.
• Keep the extension cables away from the
teeth.
The teeth may damage the cables and
result in contact with live parts.
• Check that the mains voltage is the same as
indicated on the rating plate.
• Wherever possible connect the implement
to a power socket with a residual- current
circuit breaker that has a rated current of not
more than 30 mA.
• Avoid body contact with earthed parts (e.g.
metal fences, metal posts).
• Only use approved extension cables of the
type H05VV-F or H05RN-F with a maximum
length of 75 m and which have been approved
for open-air use. The stranded cord diameter
of the extension cable must be at least 2.5
mm2. Always unreel a cable drum to its full
length so that the entire cable can be checked
for damage.
• Use the envisaged cable suspension when
attaching an extension cable.
• Never pull the cable to disconnect the plug
from the socket. Protect the cable from
heat, oil and sharp edges.
• If the connecting cable is damaged, first
disconnect the extension cable from the
socket. You can then disconnect the
connecting cable of the equipment.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent of the
same or a similarly qualified person in order to
prevent hazards.
Main Voltage
Power Input
Working width
Speed
Working depth
Number of blades
Protection class
Protection type
Weight
Sound pressure level L
Uncertainty K
PA
Sound power level L
WA
Uncertainty K
WA
Guaranteed sound power level L
Vibration left hand
Vibration right hand
Uncertainty K
TECHNICAL DATA
~230-240 V / 50 Hz
1500 W
400 mm
380min
-1
max. 220 mm
x6
II
IPX4
10kg
80.4 dB(A)
PA
3 dB(A)
91,57 dB(A)
1,28 dB(A)
93dB(A)
WA
0,968 m/s
2
0,947 m/s
2
1,5 m/s²
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1
Damage to hearing if no suitable ear
protection is used.
2
Health damage caused by hand-arm
vibrations if the equipment is used over a
prolonged period or is not properly guided and
maintained.
3. Even when all safety measure are taken,
some remaining hazards which are not yet
evident may still be present.
4. Remaining hazards can be minimized by
following the instructions in Safety
Precautions, Proper Use and in the entire
operating manual.
5. Injuries caused by the rotating blade.
6. Health risks caused by electricity. When
incorrect or damaged mains cables are used.
Follows instructions in the manual Electrical
Connections.
Warning! This electric tool generates an
electromagnetic field during operation. This
field can impair active or passive medical
implants under certain conditions. In order to
prevent the risk of serious or deadly injuries,
we recommend that persons with medical
implants consult with their physician and the
manufacturer of the medical implant prior to
operating the electric tool.
Keep the noise emissions and
vibrations to a minimum.
• Only use appliances which are in perfect
working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the
appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in
use.
• Wear protective gloves.
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
ATTENTION !
must be worn.
50
Werbung
