Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WE RECOMMEND :
Read through the complete text in the operating instructions before installing and commissioning
the device.
The operating instructions are intended to help the user to become familiar with the machine and
take advantage of its application possibilities in accordance with the recommendations.
The operating instructions contain important information on how to operate the machine
safely, professionally and economically, how to avoid danger, costly repairs, reduce downtimes
and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instructions, you have to meet the applicable
regulations that apply for the operation of the machine in your country.
Keep the operating instructions package with the machine at all times and store it in a plastic
cover to protect it from dirt and moisture.
Read the instruction manual each time before operating the machine and carefully follow its
information.
The machine can only be operated by persons who were instructed concerning the operation of the
machine and who are informed about the associated dangers. The minimum age requirement
must be complied with.
In addition to the safety notices contained in this operating manual and the particular instructions
for your country, the generally recognised technical regulations for the operation of identical
devices must be complied with.
We cannot accept any liability for damage or accidents which arise due to a failure to follow these in-
structions and the safety instructions.
You will find the representation of the most important service bodies on pages 2 and 3.
1. Handle
2. Power cord
3. Frame tubing
4. lower bar
5. Machine frame
6. Blade roller
7. Wheel
8. Wheel cap
9. Carriage bolt
10. Wing nut (plactic)
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts! There is a risk of
swallowing and suffocation!
• 1x Handle (1)
• 1x Machine frame (5)
• 1x Frame tubing(3)
• 4x Carriage bolt (9)
• 4x Wing nut (plactic) (10)
• 1x Cable clip (11)
• 2x Wheel (7)
• 2x Wheel cap (8)
• 1x Manual
Open the packaging and remove the device
carefully.
DEVICE DESCRIPTION (FIG. 1-2)
SCOPE OF DELIVERY (FIG. 2)
11. Cable clip
12. Safety release catch
13. On/Off switch
14. Wheel suspension
15. washer (pre-assembled)
16. split pen (pre-assembled)
17. lock pen
18. Screw M8
19. Nut M8
20. Drive shaft
• Remove the packaging material as well
as the packaging and transport bracing (if
available).
• Check that the delivery is complete.
• Check the device and accessory parts
for transport damage. When complaints the
dealer must be informed immediately.
Subsequent complaints will not be accepted.
• If possible, store the packaging until the
warranty period has expired.
47
Werbung
