Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Insert glass shield (A) onto the top of fire pit body (B) (see Figure 4).
WARNING
DO NOT touch the surface of glass shield when in use or just after use. Allow 30
minutes after use to cool down to prevent scalding.
4. Place the lava rocks (C) into the fire pit body (B). Approx. 0.5 kg of lava rocks are required
(see Figure 5).
NOTE: leave the igniter cover uncovered by lava rock.
CAUTION: this fire pit is equipped with natural lava rock that may crackle or pop the first time
it is used. Lava rock has been pre-heat treated. How ever, in rare cases on first time use, lava
rock may pop or burst causing small pieces of hot rock to fly out of the fire pit. These hot
pieces could strike somebody's face during the process of lighting the fire pit, stay away from
the fire pit for the first 20 minutes after igniting.
WARNING
Keep children away during assembly, as this item contains lava rocks, which are
small pieces and can be swallowed by children.
igniter cover
6
Figure 4
Figure 5
Werbung
Inhaltsverzeichnis
