Makita GA011G Betriebsanleitung Seite 8

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Applicable grinding wheel
Applicable cut-off wheel
Applicable wire wheel brush
Spindle thread
Max. spindle length
No load speed (n ) / Rated speed (n)
0
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
with BL4025
with BL4040
GA011G GA012G GA013G
100 mm 115 mm 125 mm
6.4 mm 7.2 mm
105 mm 115 mm 125 mm
100 mm 115 mm 125 mm
M10 M14 or 5/8"
(country specific)
18 mm 23 mm
2.8 - 2.9 -
5.2 kg 5.3 kg
D.C. 36 V - 40 V max
BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC
8 ENGLISH
GA014G GA015G
100 mm 115 mm
6.4 mm
105 mm 115 mm
3.2 mm
100 mm 115 mm
20 mm
M10 M14 or 5/8"
(country specific)
18 mm
-1
8,500 min
398 mm
410 mm
3.0 - 2.7 - 2.9 - 5.3 kg
5.3 kg 5.1 kg
PDC01 / PDC1200
GA016G
125 mm
7.2 mm
125 mm
125 mm
23 mm