Bosch GKS 185-LI Professional Originalbetriebsanleitung Seite 17

(25) Clamping flange
(26) Clamping bolt with washer
(27) Hex key
a)
(28) Dust/chip box
a)
(29) Extraction hose
a)
(30) Utility hook
(31) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Hand-held circular saw
Article number
Rated voltage
A)
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter
Max. base blade thickness
Min. base blade thickness
Locating bore
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
C)
ure during operation and
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V
5.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Bosch Power Tools
Vibration total values a
determined according to EN 62841-2-5:
Sawing wood: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
GKS 185-LI
working period.
3 601 FC1 2.. To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
V 18
not actually being used should also be taken into account.
-1
min 5000
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
mm 57
ator from the effects of vibration, such as servicing the
mm 41
power tool and application tools, keeping their hands warm,
●
and organising workflows correctly.
mm 134 x 280
Rechargeable battery
mm 165
mm 1,8
Bosch sells some cordless power tools without a re-
mm 0,9
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
mm 20
aging.
kg 3,2–4,3
Charging the battery
°C 0 to +35
u
°C –20 to +50
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
GBA 18V... tions. To ensure full rechargeable battery capacity, fully
≥ 4,0 Ah charge the rechargeable battery before using your tool for
ProCORE18V... the first time.
≥ 4,0 Ah
Inserting the Battery
GAL 18...
Push the charged battery into the battery holder until it
GAX 18...
GAL 36... clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
(triax vector sum) and uncertainty K
h
2
= 2.5 m/s , K = 1.5 m/s
h
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 74Z | (11.05.2022)
English | 17
2