Danfoss ERC 214 Installationsanleitung Seite 19

Parameter name - ERC 214
Display at defrost
Air=actual air temperature, FrE=freezed
temperature, -d-="-d-" is displayed
Polarity
DI1 input polarity
nc=normally closed,
no=normally open
DI2 input polarity
nc=normally closed,
no=normally open
Invert alarm relay
0=normal, 1=invert relay action
Keyboard lock enable
Readouts
Controller status
S0=cooling ON/Heating ON,
S2=wait for compressor ON time to elapse,
S3=wait for compressor OFF time to elapse-
restart time, S4=drip OFF delay after defrost,
S10=cooling stop S11=cooling stopped by
thermostat/heating OFF, S14=defrosting state,
S15=fan delay state after defrost, S17=door
open (DI input), S20=emergency cooling,
S25=manual control of outputs, S30=continous
cycle/Pull-down, S32=delay of outputs at
power up
Note: hidden parameters are greyed out
DKRCE.PI.RL0.H7.ML
Code Min Max Unit
o91 Air -d-
P--
P73 nc no
P74 nc no
P75 0 1
P76 no yES
u--
u00 S0 S32
Installation Guide | ERC 214
App. 0
App. 1 App. 2 App. 3 App. 4 App. 5 App. 6
(Def.)
-d- -d- -d- -d-
no no no no
no no no no
0 0 0 0
no no no no
--
-d- -d- -d-
no no no
no no no
0 0 -
no no -
| 19