Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Channel 4
Value:
Option
0-11
R + G
12-23
R + Y
24-35
R + B
36-47
R + P
48-59
R + C
60-71
R + W
72-83
G +Y
84-95
G +B
96-107
G + P
108-119 G + C
120-131 G + W
R = Red
G = Green
Y = Yellow
B = Blue
P = Purple
C = Cyan
W = White
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Value:
Option
132-143 Y + B
144-155 Y + P
156-167 Y +C
168-179 Y +W
180-191 B +P
192-203 B + C
204-215 B + W
216-227 P + C
228-239 P + W
240-255 C + W
19/20
51928612_V_2_0.DOC
Werbung
