Omnitronic DMP-101 Bedienungsanleitung Seite 21

23 Infrared sensor for the remote control
24 IN/ OUT/ RELOOP
Buttons to memorize and replay a continuous loop:
IN: sets the starting point of a loop (LED flashes orange)
OUT: defines the end point of a continuous loop which is
instantly started (LEDs IN and OUT light). The loop will
continue to play until the button OUT is pressed once
again.
RELOOP: starts the loop once again (LEDs IN and OUT
light). Press the button OUT to exit the loop.
25 CUE
A When pressing the button in pause mode and during
replay the unit stops and returns to the starting point of
the title (Cue point) and is in pause mode (LED lights
orange).
28 AC connection
Plug in the supplied power cable here.
B when keeping the button pressed in pause mode, the
title is momentarily replayed. As soon as you release the
button the unit instantly returns to the starting point of the
title (Cue point).
26
►
Switches between replay and pause. During replay the
blue LED lights, in pause mode the blue LED flashes.
27 PITCH CONTROL
This control sets the replay speed up to ±24 %. Turn the
control to the left to decrease the pitch, turn it to the right
to increase the pitch. The adjustment of the control is
effective only with the button PITCH pressed. The pitch
percentage is indicated in the display.
29 Line output
Stereo master outputs (optionally 3-pin XLR or RCA) for
connecting an amplifier, a mixer or other units with line
level inputs.
21/26 00039579.DOC, Version 1.0