EINHELL TC-PG 25/1/E5 Originalbetriebsanleitung Seite 22

10. Troubleshooting
Fault
Engine does not
start
Generator has too
little or no
voltage
Anl_TC_PG_25_1_E5_SPK9.indb 22 Anl_TC_PG_25_1_E5_SPK9.indb 22
GB
Mögliche Ursache
Automatic oil cut-out has not respon-
ded
Spark plug fouled
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
- 22 -
Behebung
Check oil level, top up engine oil
Clean or replace spark plug
Refuel / have the petrol cock checked
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
10.02.2022 10:19:26 10.02.2022 10:19:26