Settings; Settings Functions; Connectivity; Sound - De Dietrich DOP8786X Bedienungsanleitung

5
•

SETTINGS

SETTINGS FUNCTIONS

In the general menu, select the
«SETTINGS» function by turning the
control knob and confirm.
Different settings are proposed:
- The time, the language, the sound,
demo mode and lamp management.
Select the function you want by turning
the control knob and then confirm.
Then set your parameters and confirm
them.
Time
Modify the time; validate then modify the
minutes and validate again.

Connectivity

Activate the connectivity on your oven.
Select «ON» and confirm.
Your oven can be connected through
your box in Wi-Fi using the «De Dietrich
Smart Control» Mobile Application
which must be installed on your
smartphone.

Sound

Your oven emits sounds when you use
the keys. To keep these sounds, select
ON, otherwise select OFF to deactivate
them and confirm.

Lamp management

Two setting options are proposed:
Position ON, the light stays on throughout
cooking (except in ECO mode).
Position AUTO, the oven light turns off
after 90 seconds when cooking.
Choose your position and confirm.
After 90 seconds without any
action by the user, the display
brightness decreases to limit energy
consumption and the oven light goes
off (when it is in «AUTO» mode).
Press the back
once to restore
brightness and activate the light
during cooking if necessary.

Language

Choose your language and confirm.

DEMO mode

By default, the oven is configured in
normal heating mode.
If it is activated in DEMO mode (ON
position), the mode for presenting
products in stores, your oven will not
warm up.
To return it to normal mode, set it to OFF
and confirm.
Diagnosis
In case of a problem related to
connectivity, you have access to the
Diagnosis menu.
When contacting the service department,
you will be asked for the codes displayed
in the diagnosis.
31
or menu keys
the display's