Safety Instructions - LaserLiner MultiMeter-Home Bedienungsanleitung

Read the operating instructions and the enclosed brochure
!
"Guarantee and additional notices" completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
Function / Application
Multimeter for taking measurements in the range of overvoltage
category CAT III up to max. 300 V. The multimeter can be used to
measure DC and AC voltages, direct current, battery charge status
and resistance within the specified ranges.
Symbols
Hazardous electrical voltage warning:
Unprotected live components inside the device
housing may pose a risk of electric shock.
Danger area warning
Protection class II: The test device has
reinforced or double insulation.
Overvoltage category III: Equipment in fixed installations
and for applications where specific requirements with
regard to the reliability and availability of equipment
have to be met, e.g. circuit-breakers in fixed installations
and devices used in industrial applications which are
permanently connected to the fixed installation.

Safety instructions

• The device must only be used in accordance with its intended
purpose and within the scope of the specifications. Modifications
or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
• In overvoltage category III (CAT III), the voltage between
the test device and earth must not exceed 300 V.
• Do not expose the device to mechanical stress, extreme
temperatures or significant vibration.
• If you are working with voltages higher than 25 V AC / 60 V DC,
exercise extreme caution. Touching the electrical conductors at
such voltages poses a risk of life-threatening electric shocks.
MultiMeter-Home
11
GB