Technical Data - Lux Tools A-RT-20 Originalbetriebsanleitung

All manuals and user guides at all-guides.com
Rasentrimmer_Akku_196064.book Seite 25 Montag, 18. November 2019 9:19 09
tion point when discharged. Batteries must always be
protected against short circuits by covering the poles
with adhesive tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.

Technical data

Part number
Lawn trimmer
Protection class
Idle revolutions
Diameter of cutting area
Noise output level (L )*
WA
Noise pressure level (L )*
PA
Vibration**
Weight (without battery)
Max. operating duration with a
full battery
*) The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, this cannot be used to
infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the work-
place, include the type of room, other sources of noise, e. g. the
number of machines operating and other processes taking place
in the vicinity. Permitted workplace values can differ from coun-
try to country. This information is designed to help the user to
better assess the dangers and risks. Determination of noise
emission values in accordance with EN 50636-2-91.
**) The specified vibration emission value was measured in accord-
ance with a normed test procedure and can be used in order to
compare one tool with another. The specified vibration emission
value can also be used for an introductory evaluation of the
exposure. The vibration emission value may fluctuate from the
specified value during actual use of the power tool. These fluc-
tuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing
the vibration load is, for example, limiting the length of time you
work with the tool. All parts of the operating cycle must be taken
into account for this purpose (for example, also including times
in which the power tool is switched off and times in which it is
switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 50636-2-91.
Accessories
Accessories are available from your local vendor.
Item num- Accessory
ber
196051 Battery pack 2 Ah
196052 Battery pack 4 Ah
196054 Battery charger
196055 Battery charger
196053 Battery set with charger
196064
III
-1
8500 min
260 mm
88,3 dB(A)
(K = 3 dB(A))
78 dB(A)
(K = 3 dB(A))
< 5,8 m/s²
(K = 2,3 m/s²)
1,5 kg
30 min
GB
25