Herunterladen Inhalt Inhalt Diese Seite drucken

Makita HW001G Betriebsanleitung Seite 25

Vorschau ausblenden Andere Handbücher für HW001G:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43
Combinations of nozzles and hoses
► Fig.44
1
Splash guard
4
Extension *1
7
Vario spray lance
10
Under body spray lance
13
Connecting joint
16
High-pressure hose *1
19
Extension high-pressure hose
(10 m)
22
Hose assembly *1
*1: Standard accessory
*2: Not available in combination with under body spray lance.
Splash guard
► Fig.45
Reduces splash back when cleaning corners with the
cyclone jet nozzle.
► Fig.46: 1. Nut 2. Cyclone jet nozzle
When using the splash guard, remove the nut from the
splash guard, then insert the cyclone jet nozzle into the
splash guard, and then tighten the nut.
Foam nozzle
► Fig.47
Detergent can be sprayed as foam.
Wash brush
► Fig.48
A nozzle equipped with a brush. Useful for washing out
dirt while scrubbing with brush.
Vario spray lance
CAUTION:
When adjusting the jet pressure,
do not rotate the nozzle while pulling it toward the
trigger gun. The nozzle may come off from the trig-
ger gun and cause a personal injury.
CAUTION:
When rotating the tip of the nozzle
to adjust the water jet, do not rotate it forcibly.
Otherwise, the nozzle may break and cause an injury.
► Fig.49
Jet pressure can be adjusted by rotating the nozzle.
Variable nozzle
CAUTION:
When adjusting the jet width, do
not rotate the nozzle while pulling it toward the
trigger gun. The nozzle may come off from the trig-
ger gun and cause a personal injury.
CAUTION:
When rotating the tip of the nozzle
to adjust the water jet, do not rotate it forcibly.
Otherwise, the nozzle may break and cause an injury.
► Fig.50
Jet width can be adjusted from 0° to 25° by rotating the
front end of the nozzle.
2
Cyclone jet nozzle *1
5
Foam nozzle
8
Variable nozzle
11
Pipe cleaning hose (10 m)
14
Trigger gun *1
17
Extension high-pressure hose (5 m)
20
Swivel joint
23
Strainer assembly *1
Rotating brush
► Fig.51
Three brushes inside rotate slowly when ejecting the
jet. Suitable for cleaning light dirt on an exterior wall, car
body, bath tub, etc.
Under body spray lance
lance with the lance extension.
► Fig.52
An extra long spray lance with angled nozzle. Best for
cleaning hard-to-reach areas such as car under body
and roof gutter.
Pipe cleaning hose (10 m/15 m)
water jet when using the pipe cleaning hose.
Highly intense water jet is ejected backward. Only
trigger the water jet when the nozzle has been
inserted into the pipe to be cleaned at least up to
the red marking.
► Fig.53
For cleaning and unclogging plumbing and downpipes.
Connecting joint
► Fig.54
A joint to connect with a nozzle from other model.
Some optional nozzles require the connecting joint
(optional accessory) to attach to the trigger gun. Attach
the connecting joint to the trigger gun in the same way
as the nozzle.
► Fig.55: 1. Nozzle 2. Connecting joint 3. Trigger gun
Lance extension
► Fig.56
Pipes to extend the length of the trigger gun. Three
different lengths are available by changing the number
of the pipes to be used.
25 ENGLISH
3
Vario spray nozzle *1
6
Wash brush
9
Rotating brush
12
Pipe cleaning hose (15 m)
15
Lance extension *2
18
Extension high-pressure hose (8 m)
21
Water hose connector *1
-
CAUTION:
Do not use the under body spray
CAUTION:
Pay particular attention to the
-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis