Wbe 4100 - Bosch WBE 4100 Originalbetriebsanleitung

3.5

WBE 4100

12
11
9
10
Fig. 1: WBE 4100
Item Designation
1 Control/display panel
2 Vernier caliper
3 Wheel guard
4 Pedal
5 Tray
6 On/Off switch
7 Clamping tool holders
8 Mains socket
9 Quick-action clamping nut
10 Centering flange
11 Manual vernier caliper
12 Measuring compasses
Robert Bosch GmbH
8
6
7
Functions
Operation of WBE 4100, refer to Section 7
Manual measurement of rim distance
R Protects the operator against flying particles (e. g. dirt, water).
R Starting and stopping measurement, refer to Section 10.1
Locking of shaft / wheel.
For storing balance weights and accessories
Switching on and off.
For storing accessories
Connection for power cord.
Centering and attachment of wheel on cone
Wheel attachment.
Can be used as substitute if the electronic vernier caliper is defective.
Can be used as substitute if the rim width and rim diameter cannot be recorded electronically.
Product description | WBE 4100 | 27
1
5
4
3
2
|
1 695 656 133 2011-02-18
en