Makita HR003G Betriebsanleitung Seite 11

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Capacities
No load speed
Blows per minute
Rated voltage
Overall length
Net weight
Optional accessory
Model:
Suction performance
Operating stroke
Suitable drill bit
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
with BL4025
with BL4040
HR001G HR002G
358 mm 389 mm
373 mm 404 mm
3.9 - 4.9 kg 4.0 - 4.9 kg
DX12 (For HR001G/HR003G)
BL4020* / BL4025* / BL4040* / BL4050F
* : Recommended battery
DC40RA / DC40RB / DC40RC
11 ENGLISH
HR003G
28 mm
54 mm
65 mm
13 mm
32 mm
-1
0 - 980 min
-1
0 - 5,000 min
D.C. 36 V - 40 V max
358 mm
373 mm
3.8 - 4.9 kg
DX14 (For HR002G/HR004G)
350 l/min
Up to 190 mm
Up to 260 mm
D.C. 36 V - 40 V max
1.6 kg
PDC01 / PDC1200
HR004G
389 mm
404 mm
4.0 - 4.8 kg