Black+Decker RVA425B Bersetzung Der Ursprünglichen Bedienungsanleitung Seite 8

ENGLISH
Using the BLACK+DECKER App to operate
your robot vacuum
The BLACK+DECKER App allows you to operate and connect
to your robot vacuum from a compatible mobile device. After
downloading the App, you connect your device to the
vacuum. Then you can use the App to operate the robot.
Note: Your mobile device has to be within Bluetooth range to
operate the robot.
You can use the BLACK+DECKER App to:
Schedule an auto cleaning to occur on the days and
u
times of your choosing.
Note: If at any time, the robot is switched to OFF position, the
scheduling function needs to be restored by reconnecting to
the app after the unit has been turned on.
Initiate a quick, spot, or manual cleaning.
u
Monitor the robot's battery charge level.
u
Add another BLACK+DECKER robot vacuum to your
u
device.
View Troubleshooting FAQ for suggestions on how to
u
solve common problems or errors.
Create an account to receive promotional materials.
u
Disconnect your device from the robot.
u
To download the BLACK+DECKER App and con-
nect your device, do the following:
Download the BLACK+DECKER App, application at:
u
Double-click the BLACK+DECKER App icon to launch the
u
App on your device. An App TERMS AND CONDITIONS
page appears.
Note: The BLACK+DECKER App is governed by separate
terms and conditions available for viewing through the
mobile application.
Scroll down the App TERMS AND CONDITIONS page to
u
make the Agree button clickable.
Click the Agree button to continue. A CREATE ACCOUNT
u
page appears.
Take one of the following options on the CREATE
u
ACCOUNT page:
Complete and Submit the form if you want to create a
u
Stanley Black & Decker (SBD) user account. SBD will
send promotional emails to the email address you specify.
Click Skip to continue without creating an SBD user
u
account.
ANDROID ONLY; iOS SKIP to the next step. When the
u
Quick Setup screen appears, ensure that the "Enable
Bluetooth", "Location Services", and "App Permissions"
boxes are checked, and click Continue.
On the Select Product screen, click the Robot Vacuum
u
icon to connect the robot vacuum to your mobile device.
8
(Original instructions)
Important: The power switch ( 1 ) MUST be in the ON
position (I) for the vacuum to pair.
When the Connecting screen appears, press and hold the
u
blue start/stop button on the robot vacuum to connect your
mobile device to the vacuum. A confirmation message
appears when the connection process completes, followed
by an optional tutorial that explains Robot App basics.
To view the App User Guide and
Troubleshooting FAQ:
Click the Settings icon to launch the Settings page.
u
Click App User Guide to view instructions on how to use
u
BLACK+DECKER App features and screens.
Click FAQ to view robot vac troubleshooting tips.
u
Operating the robot Vac without the App
You can still operate the unit in auto clean mode without the
app by ensuring the power switch is on and then pressing the
power indicator (start / stop) button (3) once briefly. The unit
will run for full battery discharge before start looking for the
docking station.
Emptying the dust Bin (Fig. E)
Turn the power switch (1) off.
u
Press the dust bin release button (10) and the dust bin
u
will pop up from the top of the vacuum.
Pull out the dust bin.
u
Open the filter door (24) and empty the contents of the
u
dust bin.
Note: The dust bin can be washed using mild soap and
water.
Ensure dust bin is completely dry before reinstalling.
Cleaning the Filter (Fig. F)
Turn the power switch (1) off.
u
Remove the dust bin (9) as described above.
u
Pull out the blue or purple filter frame (25). Remove the
u
pleated filter (26) and sponge filter (27) with care.
To clean the dust from the filters, use the maintenance
u
tool or wash both filters under warm running water.
Note: Ensure both filters are completely dry before
reinstalling.
Reinstall dry filters into the filter frame. Insert the filter
u
frame into the dust bin, and reinstall dust bin into the
vacuum.
Warning! Never use the appliance without the filter.
Optimum dust collection will only be achieved with a
clean filter.
Assembly and removal of the Main Brush (Fig. G)
Turn the power switch (1) off.
u
Place the vacuum upside down on a flat surface.
u