Technical Data; Protecting The Environment - Black+Decker RVA425B Bersetzung Der Ursprünglichen Bedienungsanleitung

Problem Possible Cause
Vacuum will not Vacuum not
pair with app. sufficiently
charged.
Bluetooth function
on mobile device is
not turned on.
Mobile device
located too far from
vacuum.
Location Services
and AppPermisions
for Locations
Services may be
turned OFF.
(Android Only).
Vacuum and mobile
device need to be
restarted.
Robot will not Robot is out of
return to dock. range to "see" the
dock.
Robot is obstructed
by objects in the
cleaning area.
Robot may not be
paired to dock.
Scheduled Vacuum was not
cleaning will reconnected to app
not work. after robot was
switched OFF.
Suction Power Filters are clogged,
is weak. dustbin full.
Vacuum noise AUTOSENSE in
changes during action - vacuum
operation. changes suction
power from carpet
to hard surface.
Debris in rotating
brush, wheel or
side brush.
Note: See your BLACK+DECKER app for other
troubleshooting details.

Protecting the environment

Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Possible Solution
Ensure the vacuum is fully charged
and restart your mobile device.
Ensure Bluetooth function on your
mobile device is ON.
Move your mobile device closer to
the vacuum.
Go to your mobile devices
preferences and turn ON
permissions for the
BLACK+DECKER APP.
Turn vacuum off and then back on
and restart your mobile device.
Re-open the BLACK+DECKER
App. Attempt to pair the robot
vacuum again. Be sure to press
and hold the power indicator
(3) button on the top of the vacuum
for at least five seconds.
Move robot closer to dock.
Clear obstruction from robot's
cleaning area.
With the unit turned off, ensure the
dock is plugged into a wall outlet.
Press and hold the pairing button
(15a) and turn the robot power
switch (1) to the ON position.
Robot will beep twice when pairing
is successful.
If at any time, the robot is switched
to OFF position, the scheduling
function needs to be restored by
reconnecting to the app after the
unit has been turned on.
Clean dustbin and filters.
Remove debris from brush, wheel
or side brush.
(Original instructions)

Technical data

Voltage (V )
dc
Battery
Weight (Kg)
K25V240100X or N512295
Charger
Input Voltage
(V )
ac
Output
Voltage (V)
Current (mA)
Approx
charge time
(h)
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the Black & Decker 1
year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
com, or by contacting your local Black & Decker office at the
address indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
ENGLISH
RVA425B RVA420B
14.4v
2.5Ah
3.8
K25V240100X or N512295
charger base charger base
100 - 240v 100 - 240v
24v
1000mA 1000mA
4 - 5hrs 4 - 5hrs
14.4v
2.0Ah
3.8
24v
11