• Connect the iQBride RS to the device you want to control by
E N
simply pugging it in to the device (see example below).
• Look for the small dedicated watertight plug, accessible from the
electrical connection panel (heat pumps) or hanging below the
device (salt water chlorinators).
Once the iQBridge RS is connected to the device you want to control,
re-connect the device (heat pump, salt water chlorinator, etc.) to the
main power supply. The power ON indicateur light turns on steady
green.
6
The iQBridge RS is powered from the connected product
(heat pump, salt water chlorinator, etc.).