Installation Specifications - urmet domus 1092 Gebrauchsanleitung

DIMENSIONS (mm) AND FITTINGS
1/4"-20 MOUNT

INSTALLATION SPECIFICATIONS

•
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
off. The subject must not be backlit.
•
Do not point the camera towards reflecting objects.
•
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
device to the mains.
INSTALLATION
1 Make sure that no units are powered before starting the installation procedure.
2 Install the mini camera on the bracket and fasten it.
3 Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
Note
In order to guarantee an optimal and regular working of the switching of the IR CUT filter you are
recommended to position and fix the camera as shown in picture 1.
Applications as shown in fig. 2 or very near to 90° are not reccommended.
Back view
Picture 1: recommended
6
90°±5°
Picture 2: not recommended
DS1092-047