Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION:
-
Fill the cleaning agent container (8) with a foam-free cleaning agent.
-
Hook in the dirty water tank (9a).
-
Insert the plug into a socket with a power connection line that is complies with
the rules of the country and is equipped with an efficient switch and earth
terminal.
Outreach:
Turn on the main switch (1). The pump charges the boiler before it starts heating.
The display (2) turns on and shows for a few seconds the revision index of the PCB,
the litres of water used, litres of water consumed and continues with the temperature
and pressure status (HEAT) of the machine, when the machine is ready "176" is
displayed. (Normally the machine needs about 6 minutes to be ready).
Select the most suitable accessory for the desired application and connect it to the
multifunction handle (14) by pushing with the multifunction handle (14) through the
extension tubes, then the hose connector into the block (5) until you hear a click.
10.
Steam lever
11.
Vacuum switch
12.
Detergent switch
13.
Steam lever (10) Locking knob
14.
Tubes / Accessories Mounting
Do not add detergents, anti-scale solutions or kettle (7).
essential oils into the water tank boiler (7), as this may cause
irreparable damage to the boiler and the circuits.
8
Werbung
Inhaltsverzeichnis
